Ps one lcd hack

I thought of etching something into the side window, thought of adding water cooling, I thought of doing a bunch of things. Jump on down to see how it went. First, you need to take out the screws in the screen. In the image above there are 3 red squares. Once you take those out you can take a flat head screw driver or other flat item to seperate the plastic casing from the screen.

Once that is done you have to get the casing off of the base of the screen. To do this all you have to do is remove the 2 screws on the left and right sides of the base and use the same method to remove the case. Before you remove them the best thing to do is to unplug the speakers from the circuit board to make life a little easier. Once the screws are removed and the speakers are unplugged you should make sure there are no extra screws to be removed because some of the screens do vary.

Here is the LCD screen ouside of the casing and the base board unplugged. Now all you really have to do is figure out how you want to mount it in your case and hook cables up.

There are several ways you can mount the LCD. To do this I had to cut a square out of the door where the LCD would show through using my dremel. Below is a picture of what the inside of the door looks like with the LCD mounted. If you look at the bottom you will see that the mini-board which takes the power and video source is now hooked up. Joined: Aug 17 - These settings might actually. March 3, - am. Re: These settings might actually.

March 3, - pm. It was one of the G3 or G4 to. Anonymous Recent content. Create new account Request new password. Should I Buy: Macintosh Portable. Sharing Documentation in the Apple2. Announcements download. Applefritter BBS launched. Lisa schematics uploaded. Lisa library added. No Ads. No Trackers. No Social Media. All Content Locally Hosted. Built on Free Software.