Usually, this is the maximum amount for each memory socket. For example, if the computer is capable of holding a maximum of MB 4 GB of memory and the motherboard has four memory slots, install 1 GB or less per slot.
Immediately press the F10 key if your computer was built in or later came with Windows Vista or Windows 7. Immediately press the F1 key if your computer was built before Windows XP or earlier. From the Main screen look at the Installed Memory line. This is the total amount of memory currently installed and the speed at which it is currently operating.
Next, look at the Memory Bank information. The number of banks is equal to the number of memory slots on the motherboard. The number next to each memory bank is the amount of memory for the module that is installed in that bank. If no amount is listed, that memory slot bank is empty. Installing memory in your desktop computer Use the following steps to install memory in an HP or Compaq desktop computer. After reviewing the following steps, if you are not confident in performing the installation yourself, contact an HP authorized distributor for technical assistance.
The customer assumes all risk and liability for damages for any such installation or upgrade. You might find that your HP or Compaq computer is able to support a physical installation of 4 GB or more memory. However, this maximum memory might be further limited by the operating system not being able to address the full range of physical memory. This limitation is present on all bit hardware and bit operating systems and is not limited to HP and Compaq PC systems or Microsoft software operating systems.
See Maximum memory supported by operating system for more information. Step 1: Opening the access panel to install memory in your desktop computer Use the following steps to open the case:. Be careful not to slide skin along any interior metal edge of the computer. To reduce the chance of ESD damage, work over a non-carpeted floor, use a static dissipative work surface such as a conductive foam pad , and wear an ESD wrist strap connected to a grounded surface.
In the Search field or Questions or keywords field at the top of this page, type your computer model number, a space, and the words "opening the case. Turn off the computer and unplug all cables, except for power, and write down each cable location. Unplug the power cable and press the Power button. If possible, move the computer to a clear, flat, stable work surface over an uncarpeted floor.
If opening the case is difficult, search for a support article that specifically pertains to your computer. In the Search field or Questions or keywords field at the top of this page, type your computer model number , a space, and the words " opening the case.
Step 2: Determine if memory needs to be removed before installing additional memory in your desktop computer Use the following steps to locate the memory sockets:. Look inside the computer and locate the memory modules on the motherboard. Memory modules are long thin boards, short in height, that stick up from the motherboard at a degree angle. If the computer has an open socket, continue to add an additional memory module into the open socket. If the computer does not have an empty socket, skip to the next step to remove a memory or continuity module.
This has to be done before adding a new memory module. Account for how much memory will be removed before purchasing your upgraded memory module s. Step 3: Remove a memory or continuity module in your desktop computer Continuity modules do not contain memory, but are placeholders to close the memory circuit. Use the following steps to remove a memory or continuity module:.
Pull out, and then press down on the holding clips that retain the memory modules. The memory modules should rise up slightly out of the socket. Step 4: Add a memory module in your desktop computer Use the following steps to insert a memory module into an empty socket:. Align the slots in the memory module to the notches in the memory socket. If your system won't boot, check all the connections inside your computer.
It is easy to bump a cable and pull it out of its connector, which will disable devices such as your hard drive or CD-ROM. When restarting your system, you might get a message prompting you to update the configuration settings. Refer to your owner's manual for information. If you are still unsure, please call Crucial Technical Support for assistance.
If you get a memory mismatch message, follow the prompts to enter the Setup menu, and then select Save and Exit. This is not an error—some systems must do this to update the system settings. If the groove on the memory module and the ridge in the computer do not match up, do not force the module into the slot.
You might have the wrong type of memory. Your system recognizes only half of the new module's memory. It should match the amount you installed. If you encounter problems after checking these helpful tips, please contact Crucial Technical Support. Enjoy your new memory! People also viewed. Advisor Options Trusted for over 24 years by millions of customers to offer compatible memory and storage upgrades Read More.
There are a couple of ways to find out the memory specs of your computer. The first is the tried and true method, the manufacturer's manual either system or motherboard and physically checking the slots in the computer some laptops have the memory slots in two different locations. Or you can download a program like CPU-Z to find out what type of memory is in your computer.
In some cases, instead of just adding more memory, you may have to replace the existing memory modules with larger ones. Once you have found out what type of memory you need, it's time to purchase it. You can buy it online or locally. But remember, if you need to return it, it's easier to do it locally. Also, if you need two or four memory modules, many vendors offer twin and quad packs of memory for less than the individual price. Once you have your new memory, it's time to install it.
Note: Remember to disconnect the power going to the system before working on it. Notify me when new comments are added. Cancel reply to comment. Repairing a PC can sometimes be expensive. Any content of an adult theme or inappropriate to a community web site. Any image, link, or discussion of nudity.
Any behavior that is insulting, rude, vulgar, desecrating, or showing disrespect. Any behavior that appears to violate End user license agreements, including providing product keys or links to pirated software.
Unsolicited bulk mail or bulk advertising. Any link to or advocacy of virus, spyware, malware, or phishing sites. Any other inappropriate content or behavior as defined by the Terms of Use or Code of Conduct. Any image, link, or discussion related to child pornography, child nudity, or other child abuse or exploitation. Was this reply helpful? Yes No. Sorry this didn't help.
0コメント